Dyson Link Bridge

Dyson Link Bridge

Project Scope

Structural Glass Bride

Structural steel works

Architectural metalwork

Design and structural calculations

Client: Imperial College London

Architect: Penwarden Hale Architects

Contractor: Russell Cawberry Ltd Engineer: Iain Wright Associates

Address: Dyson Link Bridge, Imperial College London

Key Challenges

CComplex and logistically difficult installation methodology

Totally bespoke glass and steel design – no proprietary products

Heatsoked tested, toughened laminated panels

Units structurally bonded to stainless steel frame using 'Dow Corning' structural two part silicone.

Low maintaince.

The Brief

Working with the architects on the planning stage, Glass Structures Limited submitted a pc sum to the client for the works need to then where we were appointed to the project and work with the architect to come up with some provisional design.

Our
Approach

Having provided full structural calculation for the design, Glass Structures Limited attended a site meeting to undertake a 3D survey. Working from drawing everything was put in production to allow the contactor to procced with all surrounding building works. As all of the ‘stand-off’ fittings factory welded the tolerances was minimal. After apply the purpose made Satin stainless Steel (316) sider fittings the team moved onto the glazing.

Having craned the glass onto the roof area; our fully trained NVQ level 2 in structural glazing operatives had to manoeuvre the panes into position via the City Crane carefully into position.

After applying the weather seal silicone; it was time for the ‘Ritec clearsheild coating to the external faces of the whole glass bridge, this is an invisible liquid that makes the cleaning and maintenance of the new roof so much easier,
Having an extremely tight deadline our amazing team had this installed in one week in order for the main contactor to remove the scaffolding and finish to works to get the area of the college open again.

The Result

Now fully complete, the project looks highly impressive and have made the clients & Architects vision a reality.

Providing a fabulous new glass link bridge walkway to connect up and enjoy the views across campus at the same time.
The use of the glazing allows natural light to flood the building enhancing productivity within the college. With the right preparation, planning and design; we were able to achieve perfection.